Wrecking Ball Tool LLC
48x60 UltraBench Combo Bundle with UltraLeg Legs
48x60 UltraBench Combo Bundle with UltraLeg Legs
Couldn't load pickup availability
An UltraBench UB3648 top on an UltraLeg UL3648 leg kit and an UltraBench UB2448 top on an UltraLeg UL2448 leg kit, one leg kit per top, made to bolt together side by side on their 48" edges into one 4-foot by 5-foot mobile assembly table: one 48" x 60" work surface. Each top is a modular torsion box with a 3/4" dog-hole grid CNC-cut to ±.010". Bolt the two benches together through the tops' mounting holes (joining bolts not included, see What you'll need) and the dog-hole grid carries straight across the joint. That gives you a 4' x 5' assembly table with room for case work and glue-ups, without taking over the whole shop. Made in the USA by Wrecking Ball Tool LLC. Patents pending.
Set both benches to the same working height, anywhere from 32" to 43" during assembly, roll them where you need them, and lock the casters down to work.
What's included
- 1 x UltraBench UB3648 36" x 48" modular workbench top kit: 11 CNC-cut furniture-grade plywood part types with hardwood cores, and 48 #10 x 2-1/2" T25 Torx wood screws
- 1 x UltraBench UB2448 24" x 48" modular workbench top kit: 9 CNC-cut furniture-grade plywood part types with hardwood cores, and 40 #10 x 2-1/2" T25 Torx wood screws
- 1 x UltraLeg UL3648 steel leg kit: 1/8" A36 HRPO steel upper and lower legs, 14 ga steel braces, yellow zinc plated, 4 heavy-duty swivel locking casters (1,400 lb caster capacity), and all leg hardware
- 1 x UltraLeg UL2448 steel leg kit: 1/8" A36 HRPO steel upper and lower legs, 14 ga steel braces, yellow zinc plated, 4 heavy-duty swivel locking casters (1,400 lb caster capacity), and all leg hardware
- Downloadable assembly instructions
| Joined size | 48" x 60" (one 36" x 48" bench and one 24" x 48" bench bolted side by side) |
|---|---|
| Each top | 36" x 48" and 24" x 48" |
| Top surface | 1-1/2" thick, torsion-box body of 3/4" panels |
| Dog holes | 3/4", one continuous grid across the joint, compatible with 3/4" dog-table and peg-table tooling |
| Working height | 32" to 43" (floor to work surface) in 1" steps, set during assembly |
| Base | One UltraLeg kit per top: laser cut and formed A36 steel, yellow zinc plated, locking casters |
| Approx. shipping weight | 254.4 lb total (71 lb UB3648 top + 54 lb UB2448 top + 64.7 lb UL3648 legs + 64.7 lb UL2448 legs), ships as four boxes |
| Joining bolts | Not included. Use 3/4" shoulder bolts (best) or 3/4" Allen (socket head cap) bolts |
| Assembly | Customer assembled (flat-pack kits) |
| Made in | USA |
| Patents | Patents pending |
What you'll need
- About 16 oz of wood glue, 8 oz per top (not included)
- Joining bolts (not included): 3/4" shoulder bolts are your best bet, and they are commonly available at your local hardware store. 3/4" Allen (socket head cap) bolts also work.
- T25 Torx driver, #2 Phillips screwdriver, clean rubber mallet, and a sheet of 120-grit sandpaper or ScotchBrite
- SAE wrenches or sockets (7/16", 9/16", 3/4")
Grows with your shop
Every UltraBench top shares the same 3/4" dog-hole grid. Start with this setup, then add more benches later, end to end, L-shaped, or as an island, and the grid stays continuous across every seam.
Lifetime guarantee. If you are ever unhappy with your UltraBench system, send us a message and we will make it right.
Share
