• Two UltraBench UB2448 24x48 torsion box tops bolted together the long way to make a 24x96 workbench top, three-quarter side view. Leg kits are optional.
  • Two UltraBench UB2448 24x48 torsion box tops bolted together the long way as a 24x96 workbench, shown on UltraLeg UL2448 leg kits, three-quarter view. Leg kits are optional.
  • Two UltraBench UB2448 24x48 torsion box tops bolted together the long way as a 24x96 workbench top, top-down view of the 3/4-inch dog-hole grid. Leg kits are optional.
  • UltraBench UB2448 24x48 dog-hole workbench top on UltraLeg UL2448 steel legs with locking casters, 3/4 view
  • Two UltraBench workbenches bolted side by side on UltraLeg bases with one continuous dog-hole grid (multiple products shown)
  • UltraBench UB2448 on UltraLeg UL2448 legs in use with bench dogs, toggle clamps and hold-downs
  • Close-up of the UltraBench UB2448 end: 3/4 inch dog holes and interlocking CNC-cut plywood joinery
  • UltraBench UB2448 24x48 torsion box workbench top with 3/4 inch dog hole grid, view 1
1 8

Wrecking Ball Tool LLC

24x96 UltraBench Long Bundle with UltraLeg Legs

24x96 UltraBench Long Bundle with UltraLeg Legs

$1,019.99 USD
$1,259.96 USD $1,019.99 USD
Sale Sold out

Two UltraBench UB2448 tops and two UltraLeg UL2448 steel leg kits in one order, one leg kit per top, made to bolt together end to end into one 8-foot-long mobile workbench: one 24" x 96" work surface. Each top is a modular torsion box with a 3/4" dog-hole grid CNC-cut to ±.010". Bolt the two benches together through the tops' mounting holes (joining bolts not included, see What you'll need) and the dog-hole grid carries straight across the joint. That gives you one 8-foot run for breaking down long boards, laying out face frames, or setting up a long fence and stops. Made in the USA by Wrecking Ball Tool LLC. Patents pending.

Set both benches to the same working height, anywhere from 32" to 43" during assembly, roll them where you need them, and lock the casters down to work.

What's included

  • 2 x UltraBench UB2448 24" x 48" modular workbench top kits: each with 9 CNC-cut furniture-grade plywood part types with hardwood cores, and 40 #10 x 2-1/2" T25 Torx wood screws
  • 2 x UltraLeg UL2448 steel leg kits: each with 1/8" A36 HRPO steel upper and lower legs, 14 ga steel braces, yellow zinc plated, 4 heavy-duty swivel locking casters (1,400 lb caster capacity), and all leg hardware
  • Downloadable assembly instructions
Joined size 24" x 96" (two 24" x 48" benches bolted end to end)
Each top 24" x 48"
Top surface 1-1/2" thick, torsion-box body of 3/4" panels
Dog holes 3/4", one continuous grid across the joint, compatible with 3/4" dog-table and peg-table tooling
Working height 32" to 43" (floor to work surface) in 1" steps, set during assembly
Base One UltraLeg kit per top: laser cut and formed A36 steel, yellow zinc plated, locking casters
Approx. shipping weight 237.4 lb total (2 x 54 lb tops + 2 x 64.7 lb leg kits), ships as four boxes
Joining bolts Not included. Use 3/4" shoulder bolts (best) or 3/4" Allen (socket head cap) bolts
Assembly Customer assembled (flat-pack kits)
Made in USA
Patents Patents pending

What you'll need

  • About 16 oz of wood glue, 8 oz per top (not included)
  • Joining bolts (not included): 3/4" shoulder bolts are your best bet, and they are commonly available at your local hardware store. 3/4" Allen (socket head cap) bolts also work.
  • T25 Torx driver, #2 Phillips screwdriver, clean rubber mallet, and a sheet of 120-grit sandpaper or ScotchBrite
  • SAE wrenches or sockets (7/16", 9/16", 3/4")

Grows with your shop

Every UltraBench top shares the same 3/4" dog-hole grid. Start with this setup, then add more benches later, end to end, L-shaped, or as an island, and the grid stays continuous across every seam.

Lifetime guarantee. If you are ever unhappy with your UltraBench system, send us a message and we will make it right.

View full details